Drip Irrigation Rodent Control

RSS
EMAIL
Facebook
Facebook
LinkedIn
Pinterest
Twitter
Visit Us
Instagram
YouTube
YouTube

Source: ProgressiveForage.com

Newer irrigation systems like drip and subsurface drip irrigation (SDI) have been used by cutting-edge alfalfa growers for quite some time.

Early adopters recognized what these systems could offer; now benefits including overall water use reduction, better water and resource use efficiency (WUE and RUE), and greater yields have been proven in research and case studies from leading irrigation companies.

Even with the proven benefits, many growers struggle with the idea of moving away from traditional irrigation practices to something unfamiliar. How much will the conversion cost? What kind of return can I expect? Will this affect the number of cuttings each year? And perhaps one of the biggest questions: How to best manage drip irrigation rodent control?

Drip Irrigation Rodent Control. Rodents cause yield loss and crop damage if not managed

Rodents are a concern for all alfalfa growers, regardless of what irrigation method is used. Pests like mice, voles and gophers cause yield loss and crop damage when not properly managed.

Gophers are especially concerning for those who operate drip and SDI systems, as irrigation lines often become a victim of their common chewing and gnawing, damaging the entire irrigation system in addition to the crop.

However, drip and SDI systems have several unique aspects and natural defenses for efficient and effective rodent management.

Because there is no one “magic” solution for controlling pests, those looking to employ a drip or SDI system and successfully manage rodents need to build an integrated plan; one that begins before a drip or SDI system goes into the ground, continues throughout growing seasons and even includes post-cutting strategies.

Pre-plant planning

The first line of defense in the war on rodents is to identify areas of high rodent concentration, not only in the proposed drip or SDI field, but in surrounding areas as well.

Then, the following steps should be taken in each area. (Note: Poison controls mentioned in this section are effective components in an integrated plan, but can be eliminated for those looking to run fully sustainable, chemical-free operations and if needed per state regulations.)

1. Buffer zone

  • Create a buffer zone surrounding the field by eliminating weeds, ground cover and litter.
  • Cultivation and/or weed control is advised to destroy runways and weed roots and kill existing rodents. (Bonus: This also fosters healthier soil, one of the best baseline defenses against both rodent and insect infestation.)
  • Consider applying rodenticides in the buffer zone, especially if rodent pressures are high.

2. Primary field

  • Deep rip the soil to destroy burrows and disrupt the gopher’s habitat needed for survival (Note: excludes minimum tillage operations).
  • During dripline installation, a repellant or toxicant can be applied, per state regulations.
  • To reduce pathways for rodents, the shank slit can be packed with tractor tires.
  • Finally, consider a low-cost biological line of defense – for example, owl boxes.

Control while you grow

After proper pre-plant steps have been taken to control rodents, the integrated plan continues with best practices throughout the growing season.

As stated earlier, poisons and chemical controls are effective, but growers looking to reduce or eliminate the use of them can succeed with a plan that includes baiting, trapping and system-specific defense.

1. Baiting and trapping

One of the more labor-intensive strategies, trapping is also one of the most effective against all types of rodents. Keep in mind that rodents, especially gophers, are most active in the spring and fall.

Traps will be most effective during these times, so prioritize time and labor to properly execute this strategy.

  • Bait for a week, then set traps after bait has been continually taken.
  • Traps can be baited with toxic anti-coagulant.
  • For poison-free operations, traps baited with peanut butter, oatmeal or apples work well, especially for voles and meadow mice.
  • For best success, gopher traps must be set on both tunnel entrances.
  • Set out traps then check back within 48 hours.
  • Any traps not visited within 48 hours should be moved and tested in a new location.

2. System defense

Drip and SDI systems keep continuous levels of moisture in the soil, unlike flood irrigation that puts the soil through cycles of very wet versus very dry conditions or buy cialis online. This type of environment is unfavorable to rodents and they tend to avoid wet areas, making drip and SDI systems a natural repellant.

Flood irrigation offers a natural rodent control strategy in drowning out gophers when a field is flooded, which is why some experts suggest growers with drip and SDI fields still retain the ability to flood irrigate as part of an integrated rodent management strategy.

Additionally, some drip and SDI manufacturers are taking an active approach to address drip irrigation rodent control within the drip or SDI system itself.

For instance, a product has been developed that when injected into the dripline, irritates rodents and drives them to the surface where they’re more vulnerable to predators. Check local and state regulations and product labels prior to use of this product.

3. Burrow fumigants

Fumigants, though classified as chemical or non-sustainable methods, provide an alternative option to use in place of traditional chemicals and common poisons. Two types of burrow fumigants are options for pocket gopher control (again, keep in mind state regulations and labels may vary):

  • Aluminum phosphide
  • Carbon monoxide-producing machines

The biggest advantage with aluminum phosphides is the efficacy, with 85 to 100 percent efficacy common in burrow systems. Use of carbon monoxide-producing machines, while not as high in efficacy, can treat up to six burrow systems at once, making it a very fast and labor-reducing option.

Burrow fumigants require relatively high soil moisture to work well. As mentioned earlier, drip and SDI systems maintain constant and high levels of moisture in the soil, making burrow fumigants naturally more effective in these systems.

With any type of fumigant, it’s suggested to protect an entire field edge with burrow builders, paying attention to riparian areas, ditch banks and fields adjacent to the primary growth areas.

Post-cutting and crop rotation

After every cutting, closely monitor the area for any burrowing activity and take immediate action if needed.

When it’s time to rotate the field to another crop, a best practice is to rotate in a cover crop. Beans, legumes or other cover crops should be planted to enrich the soil and provide good organic matter. As mentioned earlier, healthy soils are one of the best natural defenses to rodent and insect infestations.

Furthermore, cover crops provide distraction for pests that would otherwise infiltrate profitable crops in adjacent fields.

There is no good luck – only good planning

With proper planning and ongoing best management practices, rodent threats can be minimized in drip or SDI systems, leaving alfalfa growers to enjoy benefits of higher yields and greater WUE and RUE.

No matter what course of action you take for your operation, here’s one final piece of advice: Don’t be afraid to proactively seek out additional information.

Look to fellow growers who actively operate drip or SDI systems, as well as pest management experts and local extension agents, and use that knowledge as power for your operation.

Article by Danilu Ramirez via Progressive Forage